Reusable Heat Cold Pack For Knee Click Metal Piece Gel Belly Pad
produce detail
Produce Name | beauty and personal care |
Size | 17.5X11.4CM |
WEIGHT | 400G/SET (+/-5%) |
Color | red,blue,green,yellow,orange,pink,purple,transparent |
Description | click the metal disc inside to get instant heat, Maximum heat temrperature around 54C. Activate blood circulation,Pain relief ,muscle relaxation,and etc. |
Validity | 2 Years |
TEMPERATURE | 50-57℃ |
How To Use
Usage for hot compress:
1)To active:
Flex the metal disc inside the pad back and forth to start the reaction. The liquid will be getting crystallize .When the crystallization completed, squeeze the heat pad to make it soft and ready to use.
2)To recharge:
Place the heat pad in boiling water with cloth below for about 5 minutes until all the crystals disappear, then recharge it.
Usage for cold compress:
Placed the heat cold pad in the refrigerator(not freezer),don't flex the metal disc; take it out after 20-30 minutes, as cold pad.
Used frequency | Recommended use twice a day,each time of 20-30 minutes for heat/cold. |
Validity | 2 Years. |
Storage and use | Ambient temperature at 0-60°C |
FAQ
1.What is in the pad?
The pad contains water and food grade polymer (a form of salt) and a stainless steel disc.
2.How is the heat produced?
Flexing the metal disc in the liquid creates a chain reaction causing the pad to crystallize. This crystallization ALWAYS occurs at a temperature of 57 degree C.
Once activated, the pad has available to it a predetermined amount of energy. It will use this energy to increase the temperature of the pad to approximate 130 degrees F / 54 degree C and use whatever is left to maintain that temperature. This ability to produce heat for a period of time is accomplished because all of the liquid does not crystallize immediately. Molecules that were not required to heat the pad to its maximum temperature will remain liquid, and crystallize as required, to maintain the maximum temperature.
3.How do you re-use the pad?
Once the pad has given off all of its heat it will remain in its crystallized state until it is recharged. This is accomplished by placing the crystallized pad in boiling water for 5 to 10 minutes (depending upon the size of the pad) until all of the crystals are melted. Once completely liquefied, remove the pad from the water and store it until it is required. The pad should remain liquid as it cools. If crystals form as the pad cools it has not been boiled long enough. Place the pad in boiling water again until all the crystals have dissolved and the pad is completely clear.
4.How long does the heat last?
The pad will be very hot for the first 30 minutes and then will gradually cool down.
5.How many times can the pad be used?
There is no limit as to the number of times a pad can be used.